Alvarion BreezeACCESS II CX Guia do Utilizador descarregar pdf (Página 19)

Installation

2-3

Installation Overview

The following outlines the steps of the installation procedure.

1. Select appropriate locations for the outdoor unit, the antenna (if using an

external antenna) and the indoor unit.

2. Mount the outdoor unit. If using an external antenna mount the antenna and

connect it to the outdoor unit.

3. Connect a ground cable from the outdoor unit to an appropriate grounding point.

4. Connect the indoor-to-outdoor cable to the outdoor unit and route it to the

location selected for the indoor unit. Refer to Appendix B for instructions on

preparing the indoor-to-outdoor cable.

5. Mount the indoor unit. Connect the indoor-to-outdoor cable to the indoor

unit’s Radio port.

6. Connect the indoor unit’s Ethernet port to the user’s network using an

Ethernet cable.

7. Configure the unit’s parameters.

8. Align the antenna and verify connectivity with any other units.

NOTE:

The indoor unit should only be connected to the power source after it has been connected to the

outdoor unit.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 89 90

Sem comentários

Alvarion BreezeACCESS II CX Guia do Utilizador Página 19